5
Unit type
Product description
The Comfort 350 Top is an energy efficient ventilation unit, offering heat recovery for homes and smaller commercial buildings with
ventilation requirements of up to 407 m
3
/h.
Comfort 350 Top is a system with compact dimensions that can be built into a cabinet with a width of 60 cm. Comfort 350 Top is deliv
-
ered tested and ready for operation.
The unit is used primarily in residential buildings. Due to its low sound level it is particularly suitable for ventilation in apartments. The
unit ventilates the dwelling by drawing out damp and vitiated air through valves placed in, for instance, bathroom, lavatory, kitchen
and utility room. It then blows fresh outdoor air in through valves placed in living areas such as sitting room, family room and bedrooms.
The cold outdoor air is heated up by the warm extract air in the high efficiency counterflow heat exchanger. This ensures limited heat
loss through ventilation.
As standard, the unit is supplied with ISO Coarse> 60% (G4) plate filters, which are intended to protect the unit from dirt. If you need
better filtration of the outdoor air, an ePM1 50% (F7) pollen filter can be ordered as an accessory.
Right version:
1. Duct connections (nozzle for inlet ring)
2. Electrical connections
3. Extract air filter
4. Outdoor air filter / Pollen filter
5. Extract air fan
6. Supply air fan
7. 100% Bypass damper
8. Counterflow heat exchanger
9. Automation
10. Condensate drain
