INSTRUCTIONS FOR USE
ENGLISH
9097054000 - SCRUBTEC 545B / 545BL / 553B / 553BL / BOOST 5
5
02/2007
05/2015
WARNING!
–
Always protect the machine against the sun, rain and bad weather, both under operation and inactivity
condition. This machine must be used in dry conditions, it must not be used or kept outdoors in wet
conditions.
–
This machine is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the machine by a person responsible for they safety. Children should be
supervised to ensure that they do not play with the machine.
–
Close attention is necessary when used near children.
–
Check the machine carefully before each use, always check that all the components have been properly
assembled before use. If the machine is not perfectly assembled it can cause damages to people and
properties.
–
Use only as shown in this Manual. Use only Nilfisk’s recommended accessories.
–
Do not use the machine on slopes.
–
Do not tilt the machine more than the angle indicated on the machine itself, in order to prevent instability.
–
Do not use the machine in particularly dusty areas.
–
Use the machine only where a proper lighting is provided.
–
While using this machine, take care not to cause damage to people or objects.
–
Do not bump into shelves or scaffoldings, especially where there is a risk of falling objects.
–
Do not lean liquid containers on the machine, use the relevant can holder.
–
The machine working temperature must be between 0 °C and +40 °C.
–
The machine storage temperature must be between 0 °C and +40 °C.
–
The humidity must be between 30 % and 95 %.
–
Before using the machine, close all doors and/or covers as shown in the Instructions for Use Manual.
–
When using floor cleaning detergents, follow the instructions on the labels of the detergent bottles.
–
To handle floor cleaning detergents, wear suitable gloves and protections.
–
Do not use the machine as a means of transport.
–
Do not allow the brush to operate while the machine is stationary to avoid damaging the floor.
–
In case of fire, use a powder fire extinguisher, not a water one.
–
Do not tamper with the machine safety guards and follow the ordinary maintenance instructions
scrupulously.
–
Do not allow any object to enter into the openings. Do not use the machine if the openings are clogged.
Always keep the openings free from dust, hairs and any other foreign material which could reduce the air
flow.
–
Do not remove or modify the plates affixed to the machine.
–
When the machine is to be pushed for service reasons (missing or discharged batteries, etc.), the speed
must not exceed 4 km/h.
–
This machine cannot be used on roads or public streets.
–
Pay attention during machine transportation when temperature is below freezing point. The water in the
recovery tank or in the hoses could freeze and seriously damage the machine.
–
Use brushes and pads supplied with the machine and those specified in the User Manual. Using other
brushes or pads could reduce safety.
–
In case of machine malfunctions, ensure that these are not due to lack of maintenance. If necessary,
request assistance from the authorised personnel or from an authorised Service Center.
–
If parts must be replaced, require ORIGINAL spare parts from an Authorised Dealer or Retailer.
–
To ensure machine proper and safe operation, the scheduled maintenance shown in the relevant chapter of
this Manual, must be performed by the authorised personnel or by an authorised Service Center.
–
Do not wash the machine with direct or pressurised water jets, or with corrosive substances.
–
The machine must be disposed of properly, because of the presence of toxic-harmful materials (batteries,
etc.), which are subject to standards that require disposal in special centres (see Scrapping chapter).
Summary of Contents for 553B
Page 99: ......
