©
2007 Nil
fi
sk-Advance, Inc.
11/04 revised 3/07 Form No. 56040825
page 2 of 3
INSTALLATION INSTRUCTIONS
1
See Figure 1.
Locate the (2) Nutserts
(A)
behind the model decal on the left side of the machine.
2
Cut through the decal to expose both nutserts
(A)
.
3
Install the (2) Bushings
(5)
using the (2) Screws
(6)
as shown.
4
Install the Wand Bracket Assembly
(1, 2, 3 & 7)
onto the Bushings
(5)
as shown.
5
Assemble the Wand Assembly
(4)
onto the Wand Bracket as shown.
Convertamatic™ model shown. Installation and use is the same on all models.
FIGURE 1
