183
Service Manual – SW5500, FLOORTEC R 985
29 - Engine System, LPG
LPG System Hose and Fitting
WARNING:
This procedure must be performed by personnel qualified to handle the LPG systems,
according to the law in force.
Moreover, it is necessary to wear accident-prevention clothes, according to the law in
force (heavy gloves, antistatic non-synthetic clothes, suitable to cover the whole body,
antistatic and antispark shoes, helmets with visor; etc.).
WARNING: The hoses (A) and (B) must be replaced periodically, according to the law in force.
The hose (B) must be of a specific length, in order to comply with the safety technical
data; it must not be shortened for any reason.
Removal
in the relevant parapgaph)
2 Turn the ignition key to “0”, then engage the parking brake
3 Open the engine compartment hood with the handle and fasten it with the support rod
4
If fitted, remove the machine right side panel by lifting it to disengage it from the fasteners.
5 If the engine is hot, wait that it cools down
6 Check that the LPG tank valve is closed
7
Unscrew and remove the relevant hoses (A), (B) or (C) and/or the relevant fittings, and note the
following:
Figure 16:
A
B
C
