WHEEL DRIVE SYSTEM
72
Service Manual – Advenger, 2800ST, 3800ST, BR 755, BR 855
Replacing the Rear Wheels
WARNING!
Park the machine on a dry flat surface, turn the main key switch Off and disconnect the battery pack at the red Anderson connectors
in the battery compartment.
1 Block the front Drive Wheel
(4)
.
2 Jack the Rear Wheel
(9)
to be replaced per the instructions at the front of this manual in “Jacking Points” section.
3 To prevent injury, if the rear wheel bearing has frozen, replace the bottle jack with blocks or a jack stand before pounding the wheel.
4
See Figure 38.
Use a 17mm socket to remove bolt
(A)
, washer
(B)
and wheel
(C)
.
5 If the bearing has seized, pound off the wheel and use a bearing puller to remove the inner race from the axle.
6
Apply anti-seize
to the inner bearing surface of the new wheel; then replace wheel on axle.
7
Apply anti-seize
to the bolt threads before refastening bolt, washer and wheel.
FIGURE 38
