16
1)
Option depending on model
Original Instruction Manual
4
5
4. Clean the fi lter seal (4).
Check it for damage and
replace if necessary.
5. Check antistatic clamp (5)
for damage and have it
replaced by Nilfi sk Service if
necessary.
6. Check the fl oater (6) for
proper operation: When
you turn the fi lter holder, the
fl oater should move back
and forth easily.
7. Fit a new fi lter element.
8. Fit the fi lter holder and turn it
clockwise to secure it.
9. Dispose of the used fi lter
element in accordance with
legal regulations.
6
6
7.2.5 Replacing filter element
(Automatic Filter
Cleaning System)
1)
1. Open the retaining clamps
and remove the upper sec-
tion of the cleaner from the
dirt tank. Lay the upper sec-
tion of the cleaner down with
the filter element facing up-
wards. Do not place the up-
per section of the cleaner
on the guard (1) and do not
damage the filter element.
2. Open the bar handle (2) and
remove it.
3. Remove the filter holder (3).
4. Carefully remove the filter el-
ement.
5. Clean the filter seal (4).
Check it for damage and re-
place it if necessary.
6. Check the antistatic clamp
(5) for damage and have it
replaced by Nilfisk Service if
necessary.
7. Check that the control flap
(6) for filter cleaning works
properly. The control flap
should move back and for-
wards easily.
5
1
3
2
6
4
Never use the vacuum clean
er
without a filter.