background image

4

1)

OEL=Occupational Exposure Limit, *) Optional accessories / Option depending on model

Original instruction

1

 

IMPORTANT SAFETY INSTRUCTIONS

1.1 

Symbols used to mark instructions

DANGER

  Danger that leads directly to serious or irreversible injuries, or

 

even death.

WARNING

  Danger that can lead to serious injuries or even death.

CAUTION

  Danger that can lead to minor injuries and damage.

 Before starting up your machine for the first time, this instruction manual must be read through 

carefully. Save the instructions for later use.

1.2 

Instructions for use 

Besides the operating instructions and the binding accident prevention regulations valid in the country 

of use, observe recognised regulations for safety and proper use. 

1.3 

Purpose and intended use

This machine is designed for industrial use, such as e.g. plants, construction sites and workshops. 

This machine is also intended for commercial use, for example in hotels, schools, hospitals, factories, 

shops, offices and rental businesses. Accidents due to misuse can only be prevented by those using 

the machine. The appliance is suitable for picking up dry, non-flammable dust and liquids

Any other use is considered as improper use. The manufacturer accepts no liability for any damage 

resulting from such use. The risk for such use is borne solely by the user. Proper use also includes 

proper operation, servicing and repairs as specified by the manufacturer.

READ AND FOLLOW ALL SAFETY INSTRUCTIONS. 

For Dust Class L machines (with type designation -0L, 2L, LC) following applies: 

The appliance is suitable for picking up dry, non-flammable dust, hazardous dusts with 

OEL

1)

 value > 1mg/m3. Dust Class L (IEC 60335-2-69). The dusts which belong to this 

class have OEL

1)

 values > 1mg/m3. For machines intended for the Dust Class L, the filter material is 

tested. The maximum degree of permeability is 1% and there is no special requirement for disposal. 

Observe national regulations before use. For dust extractors, ensure adquate air change rate L, when 

the exhaust air is returned to the room.

1.4 

Important warnings 

WARNING

•  To reduce the risk of fire, electric shock, or injury, please read and 

follow all safety instructions and caution markings before use. This 
vacuum cleaner is designed to be safe when used for cleaning 
functions as specified. Should damage occur to electrical or me-
chanical parts, the cleaner and / or accessory should be repaired 
by a competent service station or the manufacturer before use in 
order to avoid further damage to the machine or physical injury to 
the user.

Summary of Contents for ATTIX 19 GALLON AE



















Reviews: