FORM NO. 56043025 / BA 700, 800, 1000 / 28LX, 32LX, 38LX / 280HD, 320HD, 380HD -
23
BRUSH DRIVE SYSTEM
L
N
J
K
M
_____________________________________________________________________________
LIMIT SWITCH REPLACEMENT
1
Remove the actuator from the machine (see the
Brush Lift Actuator Replacement
section).
2
See Figure 5. Remove the
(J)
Screws and Cover
(K)
, be careful not to lose the spring and washers. Note the position
of the Adjuster
(L)
for reassembly.
3
Remove the
(M)
Diodes from the switches.
_____________________________________________________________________________________________________________________________
BRUSH LIFT LIMIT SWITCHES (continued)
4
Remove the
(N)
Screws, the switches and the switch shroud.
5
Follow steps 2-4 in reverse order to reassemble the actuator.
6
After reassembling the actuator and before reinstalling the actuator in the machine, adjust the UP and DOWN limits
(see the
Brush Lift Limit Switch Adjustment
section).
FIGURE 5
