26
1
2
1
2
3
4
3
5
4
6
General information
1.11 Driver’s seat
Attention!
Adjust the seat to suit the driver before
starting the vehicle.
Fore/aft adjustment
Release this by lifting the locking lever (1) then move the
seat.
Weight
Adjust when the driver is sitting on the seat by pulling or
pressing the lever (2).
The seat is set correctly when the arrow is in the middle
clear area of the viewing window. (Pictures 1 + 2)
Do not operate the lever for more than one minute in order
to avoid compressor damage.
Armrest
The armrest can be folded up.
Change the angle of the armrest by turning the
adjustment knob (3).
Backrest adjustment
Move the locking lever (4) upwards and adjust the
backrest angle.
When you have finished adjusting the backrest, the
locking lever must latch into the desired position.
Lumbar support
Adjust the curvature of the backrest cushion by turning
the adjustment knob. (5) (Picture 3)
0 = No curvature
1 = Maximum curvature at the top
2 = Maximum curvature at the bottom
Steering column
Release the handle (6) to adjust the position of the
steering column. (Picture 4)
!
Weight adjustment
Operator’s Manual City Ranger 3500