ENGLISH
USER MANUAL
24
909 6748 000(3)2010-03 A
BA 451 - BA 451D - BA 531 - BA 531D
VACUUM SYSTEM MOTOR FILTER CLEANING
Drive the machine on a level
fl
oor.
1.
(Only for
2.
BA 451D
and
BA 531D
): Turn the ignition key (80) to “0”.
(Only for
BA 451
and
BA 531
): Turn off the machine by pressing the switch (71) and/or (73).
Open the recovery tank.
3.
If necessary, drain the water from the tank in order to make the
fi
lter visible.
4.
Check that the pre-
fi
lter is clean. If necessary clean it with water and compressed air, then install it.
5.
Perform steps 1, 2 and 3 in the reverse order.
6.
SOLUTION/CLEAN WATER FILTER CLEANING
Drive the machine on a level
fl
oor.
1.
(Only for
2.
BA 451D
and
BA 531D
): Turn the ignition key (80) to “0”.
(Only for
BA 451
and
BA 531
): Turn off the machine by pressing the switch (71) and/or (73).
Close the solution tap (A, Fig. 7) under the machine, behind the right rear wheel. The tap (A) is closed when it is in the position
3.
(B) and it is open when it is in the position (C).
Remove the transparent cover (D), then remove the
fi
lter strainer (E). Clean and install them on the support (F).
4.
NOTE
The
fi
lter strainer (E) must be correctly positioned on the housing (G) of the support (F).
Open the tap (A).
5.
E
G
F
E
D
A
C
B
Figure 7
S311338
909 6748 000(4)2010-03 A.indb 24
909 6748 000(4)2010-03 A.indb 24
04/03/2010 13.56.14
04/03/2010 13.56.14
Summary of Contents for ecoflex BA 451
Page 115: ......
