background image

04

english

IVB 3-M
IVB 5-M
IVB 7-M

1) 

Option depending on model

Use the socket on the vacuum 
cleaner for the purpose defined 
in the operating instructions only.

Before plugging an appliance 
into the appliance socket:
1.  Switch off the vacuum clean-

er

2.  Switch off the appliance to 

be connected.

CAUTION!

Follow the operating instructions 
and safety instructions for appli-
ances connected to the power 
tool socket.

2 Description

2.1 Purpose

This cleaner is suitable to pick 
up dry, nonflammable dust, liq-
uids, sawdust and hazardous 
dusts with maximum room con-
centration values 

 0.1 mg/m

3

 

(dust class M).

Depending on how hazardous 
the dust is, the cleaner must 
be fitted with appropriate filters. 
See table in section 5.1.1.

Tool socket

Maintenance, cleaning and re-
pair

Only carry out maintenance 
work described in the operating 
instructions.

Always pull out the mains plug 
before cleaning and mainte-
nance of the vacuum cleaner.

During maintenance and clean-
ing, handle the vacuum cleaner 
in such a manner that there is no 
danger for maintenance staff or 
other persons.

In the maintenance area
–  use filtered compulsory ven-

tilation

–  wear protective clothing
–  clean the maintenance are 

so that no harmful substanc-
es get into the surroundings.

Before removing the vacuum 
cleaner from the area contami-
nated with harmful substances:
–  clean the outside of the vac-

uum cleaner, wipe it clean or 
pack the vacuum cleaner in 
well sealed packaging

–  and avoid spreading depos-

ited harmful dust.

During maintenance and repair 
work all contaminated parts that 
could not be cleaned satisfacto-
rily must be:
–  packed in well sealed bags
–  disposed of in a manner that 

complies with valid regula-
tions for such waste remov-
al.

A dust test must be performed at 
least once every year by Nilfisk 
Advance service or a trained 
person. This test includes, for 
example, whether there is dam-
age to the filter, the vacuum 
cleaner is sealed to the air and 
the control equipment works 
properly.

Accessories and spare parts

Use only the brushes supplied 
with the vacuum cleaner or 
specified in the operating manu-
al. The use of other brushes can 
adversely affect safety.

Use only original Nilfisk Ad-
vance accessories and spare 
parts (see section 9.5). The use 
of other parts can adversely af-
fect safety.

Summary of Contents for IVB 3-M



















Reviews: