25
1)
Optional accessories / Option depending on model
Original Instructions
IVB 995-0H/M SD XC Type 22
E
F
G
C
D
8. Carefully remove the filter
element and close the pro-
tective filter bag with a knot.
Inserting the filter element:
9. Clean the filter seal (F).
Check it for damage and re-
place it if necessary.
10.
Check the antistatic clamp
(G) for damage and have it
replaced by Nilfisk Service if
necessary.
11. Fit a new filter element (E).
12. Fit the filter holder (D). En-
sure that it is in the correct
position.
13. Fit bar and close bar handle
(C).
14. Dispose of the used filter ele-
ment in accordance with le-
gal regulations.
7.2.6 Replacing the filter for
air suppy to motor
During the following work, en-
sure that dust is not unnecessarily
spread around. Wear a P2 breath-
ing mask.
Never use the vacuum cleaner with-
out a filter.
1. Remove filter cassette (A).
2. Remove filter element (B)
from filter cassette.
3. Dispose of the used filter ele-
ment in accordance with le-
gal regulations.
4. Fit a new filter element.
5. Attach the filter cartridge.
B
A
