SAFE OPERATING PRACTICES
(
continued)
Propane Powered Floor Burnishers are designed and manufactured for high-speed commercial floor buffing only.
These machines are designed to buff most modern types of floors including composition tile, stone, marble,
terrazzo, and resilient floor covering using floor coatings designed for high-speed buffing.
Even though NFPA 58 8-4.5 says ...“these machines shall be permitted to be used in buildings frequented by the
public, including the times when such buildings are occupied by the public”, Nilfisk-Advance suggests that the
machines be operated when occupancy of a given work area is at a minimum.
These machines should not be used:
•
in nursing homes, hospitals, day-care centers etc.
•
by unqualified or untrained personnel.
•
unless properly maintained and adjusted.
•
on areas with obstructions such as thresholds, floor outlet boxes, etc.
•
in areas where loose tile or objects are present.
•
in rooms without proper ventilation.
These machines should not be left running unattended.
These Propane Powered Burnishers are designed with the burnishing head offset to the right side to make it easier
to burnish the floor close to the edge. It is recommended to start burnishing on the right side of the isle, turn and
come back down the isle in the opposite direction overlapping the previous path slightly. Continue this pattern until
the floor area to be burnished has been covered with the last pass being on the right side of the machine. The
forward speed is generally at a normal walking speed.
CAUTION: Do not allow the burnisher to operate without moving the machine. It may burn the floor and
could damage the floor covering.
SPECIFICATIONS:
SelectGloss™ 21PS
SelectGloss™ 28PS
Pad
21" (53,3 cm)
Pad Size
28" (71,1 cm)
Pad Speed
2000 RPM
Pad Speed
1700 RPM
Width
22.75" (57,8 cm)
Width
30" (76,2 cm)
Length
51.5" (130,8 cm)
Length
58.25" (148,0 cm)
Engine
Kawasaki 17hp
Engine
Kawasaki 17hp
Starting
12V Battery
Starting
12V Battery
Weight
192 lbs. (87 kg)
Weight
215 lbs. (97,5 kg)
Handle
Welded Steel Adjustable
Handle
Welded Steel
Adjustable
Deck
Cast Aluminum Alloy
Deck
Cast Aluminum Alloy
Vibration
Less than 2.5 m/s˝
Vibration
Less than 2.5 m/s˝
Sound Level
87 db
Sound Level
87 db
