11-600203072REVA
NILFISK L
ABEL
MACHINE DESCRIPTIONS
Operator Handle (1)
- Operator holds this to move the machine from one location to another.
Solution Tank Lid (2)
- Fill Solution Tank here with warm water and chemicals.
Switch Plate (3)
- This is where the switches are located that operate the pump, vacuum and heater.
Recovery Tank Lid (4)
- The Recovery Tank can be flushed out by running clean water into this opening
with the Drain Gate
(7)
open. The vacuum float Shut-OFF can also be accessed through this opening for
maintenance.
Vacuum Inlet (5)
- This is where the vacuum hose attaches to the machine.
Latch (6)
-
Open the latches to access the base compartment, which contains the motors and heater.
Drain Gate (7)
-
Open this gate to drain the recovered solution out of the machine. Be sure to keep this
gate clean.
Castor (8)
-
The castor swivels for easy maneuvering in tight spots.
Wheel (9)
-
Large, non-marking wheels for ease of transport.
Power Cord(10)
-
One, 25 foot cord. Do not use if the cord is damaged.
BECOME FAMILAR WITH YOUR NEW EXTRACTOR
1
2
3
4
5
6
7
10
9
8
Summary of Contents for MX 307 H
Page 69: ...11 600203072REVA ...
