Nilfisk-Advance S105A, Manual

7

1. Description

The S105A is especially suited 

for foam cleaning and disinfection 

 using tap water in smaller areas.

The unit is suited for use in rooms 

with floor drains. 

2. Location

The S105A must be placed in a 

frost-free room only.

To ease the operation, leave as 

much free space as possible 

around the unit.

3.  Water supply

Water quantity: 

25 l/min.  /  6.6 USG p.m. 

Pressure: 

2.5-5 bar / 250-500 kilopas-

cal/36-73 PSI

Max. temperature: 

60°C/140°F

Connection: 

1/2" or 3/4" external thread

Note: A closing valve must be 

mounted directly before the unit

.

It must be expected that the foam 

quality and the rinsing effect will be 

reduced if the requirements to the 

water supply are not met.

Taps, mixing batteries etc. may 

have a limiting effect on the wa

-

ter quantity. If one of these are 

placed before the unit and the 

water quantity is not sufficient, it is 

re commended to replace it with a 

ball valve. The replacement should 

be carried out by an authorised 

plumber.

4. Mounting 

Mount the included shut off valve 

for air with regulation and pressure 

gauge on the exiting air unit by 

means of a Ø6 mm air hose.

It is recommended to mount the 

S105A inside the Ecolab Protect 

Junior safe storage unit.

S 105A

4.1

3.1 Air supply

Max. air supply: 

3,5 bar / 350 kilopascal / 50 PSI.

Connection: 

¼" external pipe thread.

Please make sure that the pres-

sure of the air supply does not 

exceed the pressure of the water 

supply.