background image

INSTRUCTIONS FOR USE

ENGLISH

107412885 - SC100

3

04/2015

SAFETY

The following symbols indicate potentially dangerous situations. 

Always read this information carefully and take all necessary 

precautions to safeguard people and property.

The operator’s cooperation is essential in order to prevent 

injury. No accident prevention program is effective without the 

total cooperation of the person responsible for the machine 

operation. Most of the accidents are caused by failure to comply 

with the simplest rules for exercising prudence. 

VISIBLE SYMBOLS ON THE MACHINE

2%

WARNING!

Do not use the machine on slopes with 

a gradient exceeding the specification.

SYMBOLS THAT APPEAR ON THIS MANUAL

DANGER!

It indicates a dangerous situation with risk of 

death for the operator.

WARNING!

It indicates a potential risk of injury for people.

CAUTION!

It indicates a caution or a remark related to 

important or useful functions.

Pay careful attention to the paragraphs marked 

by this symbol.

NOTE

It indicates a remark related to important or useful 

functions.

CONSULTATION

It indicates the necessity to refer to the Instructions 

for use Manual before performing any procedure.

GENERAL INSTRUCTIONS

Specific warnings and cautions to inform about potential 

damages to people and machine are shown below.

DANGER!

 

Before performing any maintenance, repair, cleaning or 

replacement procedure disconnect the plug from the 

electrical mains.

 

Do not wear jewels when working near electrical 

components.

 

Do not operate the machine near toxic, dangerous, 

flammable and/or explosive powders, liquids or 

vapours: This machine is not suitable for collecting 

dangerous powders.

WARNING!

 

This machine must be used by properly trained 

operators only.

 

Carefully read all the instructions before performing any 

maintenance/repair procedure.

 

Improper connection can cause electric shock. Connect 

the machine to a properly earthed mains supply.

 

Do not tamper with the power supply cable plug. If the 

power supply cable plug cannot be connected to the 

outlet, have an outlet installed by a qualified technician, 

according to the law in force.

 

Before connecting the power supply plug to the 

electrical mains, check that frequency and voltage, 

shown on the machine serial number plate, match the 

electrical mains voltage.

 

Do not unplug the machine by pulling the supply cable. 

To unplug, grasp the plug, not the cable.

 

Do not handle the plug or the machine with wet hands.

 

Turn off all controls before unplugging.

 

Regularly check the power supply cable for damages, 

cuts, cracks and wear. If necessary, replace it.

 

If the power supply cable is damaged, it must be 

replaced by the Manufacturer or by an authorised 

Service Centre.

 

Do not pull or carry the machine by the power supply 

cable and never use the power supply cable as a handle. 

Do not close a door on the power supply cable, or pull 

the power supply cable around sharp edges or corners. 

Do not run the machine on the power supply cable. 

The rotating brush must not come into contact with the 

power supply cable.

 

Keep the supply cable away from heated surfaces.

 

To reduce the risk of fire, electric shock, or injury, do 

not leave the machine unattended when it is plugged 

in. Disconnect the machine from the electrical mains 

when not in use and before performing maintenance 

procedures.

 

Not for outdoor use. Always protect the machine against 

the sun rays and wet conditions. This machine must be 

stored indoor.

 

Before using the machine, close all doors and/or covers 

as shown in the Instructions for use Manual.

 

EU countries: This appliance can be used by children 

aged from 8 years and above and persons with 

reduced physical, sensory or mental capabilities or 

lack of experience and knowledge if they have been 

given supervision or instruction concerning use of the 

appliance in a safe way and understand the hazards 

involved. Children shall not play with the appliance. 

Cleaning and user maintenance shall not be made by 

children without supervision.

 

Non-EU countries: This machine is not intended for use 

by persons (including children) with reduced physical, 

sensory or mental capabilities, or lack of experience and 

knowledge.

107412885(1)04-2015 A.indb   3

16/09/2015   16:54:38

Summary of Contents for SC100















Reviews: