Scrub System, Disc - Cable Version
74
Service Manual – SC450
Scrub System, Disc - Cable Version
Functional Description
The disc brush system can be started by the operator
The disc brush turn counter-clockwise
The brush system, when turning, cleans/washes the
floor surface and assist machine forward movement.
The deck, where brushes suitable for cleaning the
particular type of floor are installed, is the main part
of the brush system. The brush deck is fixed and in
-
tegrated in the machine with a support plate On the
support plate, there are two handwheels to adjust the
machine straight forward movement and speed
The brush working pressure is functional to the ma-
chine designed balance
The brush motor (M1) is supplied by the electromag-
netic switch (ES1) which is driven by the fu switches
(SW1) and (SW3 with SW4)
The system, once activated, uses the solution coming
form the solution system, to wash the floor.
To work properly, the brush motor needs the follow
-
ing:
•
Brush switch (SW1) turned on
•
Push-buttons (SW3) pressed
Wiring Diagram
BRUSH MOTOR RELAY (ES1)
MAINS FILTER (FL1)
DISC BRUSH MOTOR (M1)
MAINS PLUG (PL)
BRUSH SWITCH (SW1)
BRUSH ACTIVATION
PUSH-BUTTONS (SW3) (SW4)
P2000023C
