28
04 - Control System
Hours Menu
The hours menu displays the amount of time the machine has been
active in each of the listed categories The On Time represents
the total time that the machine has been powered up, regardless
whether it was active or sitting neutral The remaining times
indicate how long the machine was active and performing the
specific functions. This information can be helpful when determining
which preventive maintenance tasks are due to be performed
Faults Menu
The faults menu lists the active or past machine faults This can be
helpful for troubleshooting, or for predicting a pending component
failure For example, if a motor has a history of increasingly frequent
over-current errors, it may be a sign of a pending motor failure
The information displayed is:
(A)
Fault occurrence number,
(B)
Error Code,
(C)
Drive-Time Hour Meter when the fault occurred,
and
(D)
Error Description
The fault history can also be cleared (available only to the technician in Service Mode) This should be done
only if all past faults are accounted for or diagnosed
Keys Menu
The Keys menu displays information about the current key, and also permits the addition or deletion of
authorized user keys User level keys (blue keys) can be authorized or de-authorized to operate the machine
However, if no keys have been authorized, then all user keys will be accepted
Every key has a Hard-coded ID number (HID) This is the serial number for the key, and is also imprinted
on the back of the key Supervisor level keys also contain a Soft-coded ID number (SID), which determines
the key type
Authorizing User Keys
1 Start the machine with a supervisor key or in service mode
2 Go to the Keys/Read Key menu function
3 Replace the key with a user-level key to be programmed
4 Press the Up arrow switch to add the key, and then the Right arrow switch to save
Deauthorizing User Keys
1 Start the machine with a supervisor key or in service mode
2 Go to the Keys/List Keys menu function
3 Scroll to the key to be deleted in the list, and press the Right arrow switch to select it
4 Press the Up arrow switch to delete the key, and then the Right arrow switch to save
•
If all user keys are removed from the list, then any user key will be authorized to start the machine
A
B
C
D
Read Key
SN
Back
Add
Family
Type
Key List
000017FB0F44
01
User
No
