SD 400 / SD 430 / SD 500 / SDP 430
2 _1 Safety instructions
13
2
_1.7 Conversions and changes to the
machine
Due to reasons of safety, no changes may be made to
this machine. Any changes which are independently
carried out on the machine rule out liability claims made
against the manufacturer for resulting damage.
Original parts and accessories have been specially
designed for this machine. Parts and equipment from
other manufacturers have not been tested by us, and
have not therefore been released. Their installation and
integration may impede the safety and perfect function
of the machine. All liability claims against the
manufacturer for damage which occurs due to the use
of non-original parts and equipment are out of the
question.
2 _1.8
General safety instructions
•
When not in use, the machine must be locked away;
the key - if the design provides for a central key -
must be removed in order to prevent the
unauthorised use of the machine.
•
If the machine cannot be locked away, other
suitable measures for preventing the unauthorised
use of the machine must be taken.
•
The machine’s electric and mechanic safety devices
must not be modified or withdrawn.
•
When operating the machine watch that you do not
affect third parties, have an eye on children in
particular.
•
When transporting larger machines in lifts watch
that the permissible transport weight is not
exceeded.
•
If cable connections or extension cords are used,
their couplings must be splashwater protected.
2 _1.9
Specific safety hints
Never switch the machine on while the
handle is in an upright position. Danger!
When the machine is transported in lifts
make sure that the handle is in a secured
position.
Always operate in outward direction from
the mains socket in order to avoid
overrunning the mains cable.
2 _1.10 Safety
instructions
for
mains-
operated machines
Make sure that the mains cables do not get damaged
by squeezing, bruising, overstrain or friction. The mains
cables must be checked regularly for damage, bare
wires, burning marks etc. The machine must not be
used if the mains connection lead is not in perfect
condition. The mains plug must always be disconnected
prior to care and maintenance operations on the
machine or when changing accessories. When
replacing parts such as, e.g. brushes, mains connection
leads, plugs, etc., the technical data specified by the
manufacturer must be adhered to and original
replacement parts must be used, as the safety of the
machine may otherwise be impeded. If the connection
lead is damaged, this may only be replaced by a repair
workshop nominated by the manufacturer, as special
tools are required for this purpose.
2 _1.11 Information signs and stickers
Writing, information signs and stickers
must not be removed!
Damaged and illegible information signs
and stickers must be replaced
immediately!
2 _1.12 Product liability
We herewith point out explicitly that the use of the
machine is restricted without exception to the purpose it
is designed for. If the machine is used for any other
purpose all risks are borne by the user.
Any liability of Messrs is strictly excluded.
2 _1.13 Sources of danger
The operator must not carry out any repairs on the
machine unless trained specifically. When maintaining
or servicing the machine, when exchanging parts or
resetting to a different function it must be ensured that
the machine cannot start accidentally. It must also be
protected from rolling off or tilting and no parts may be
in a position that may cause them to fall down or close
by themselves.
Always attend to locally applicable safety
and accident prevention regulations.
Summary of Contents for SD 400
Page 91: ...SD 400 SD 430 SD 500 SDP 430 ...
