56041481
P1
P2
USE
USE OF THE WORKING PROGRAMS
When the machine has been turned on and, eventually,
after the start of the gasoline engine, it is possible to
choose one of the two working programs
P1
and
P2
pressing the relevant button:
P1
is the “light cleaning program” (for internal
environment, i.e. smooth floor, moquette, small debris
etc.)
P2
is the “hard cleaning program” (for external
environment, i.e. asphalt, uneven floor, big debris etc.).
After having pressed the preferred button the relevant
light indicator will turn on, together with the suction
motor indicator.
The temporary activation of the main brush and suction
electrical motors will also occur; (the relevant light
indicators will flash).
Note
: the working parameters of programs
P1
and
P2
are pre-set by the manufacturer of the machine:
if you want to change the pre-set values call the
customer service personnel of your supplier.
Lower the side brush/es pressing the top of the relevant
lever and moving it forward,
Note
: on the control panel the corresponding light
indicators will turn on.
To lift the side brush/es press the top of the levers and
move them backward.
Note
: the side brush/es, the main brush and the suction
fan will start automatically when the accelerator
pedal will be pressed (AUTO POWER-ON).
9
