OPERATOR MANUAL
2
146 0596 000(4)2004-02
INTRODUCTION
PURPOSE AND CONTENTS OF THIS
MANUAL
The purpose of this manual is to provide the Customer
with all necessary information to use the machine prop-
erly in a safe way. It contains information about techni-
cal characteristics, operation, machine storage,
maintenance, spare parts and safety conditions.
This manual is intended for Operators and Technicians
qualified for performing the machine maintenance.
Before carrying out any procedure on the machine, the
Operators and Qualified Technicians must read this
manual carefully. Contact the Manufacturer in case of
doubts regarding the interpretation of the instructions
and for any further information.
IDENTIFICATION DATA
The Machine Model and Serial Number are marked on
the nameplate that is located under the hood. (20, Fig.
T).
The machine production year is shown after the Date
Code on the serial plate. (A04 means January 2004)
This information is useful when machine and engine re-
placement parts are required. Use the following table to
write down the machine identification data for any fu-
ture reference.
.
OTHER REFERENCE MANUALS
– Electronic Battery Charger Manual, also provided, is
to be considered an integral part of this manual.
The following manuals are also available:
– Service Manual (that can be consulted at any
Advance Service Center)
– Part List,
supplied with the machine
SPARE PARTS AND MAINTENANCE
All extraordinary maintenance and repairs must be car-
ried out by qualified personnel or by Advance Service
Centers. Only original spare parts and accessories
should be used.
Call Advance for service or to order spare parts and ac-
cessories. Specify the machine Model and Serial Num-
ber when discussing your machine.
MACHINE Model:.................................................
MACHINE Serial Number:....................................
MODIFICATIONS AND IMPROVEMENTS
Our Company constantly improves its products and re-
serves the right to make changes and improvements at
its discretion without being obliged to apply such bene-
fits to the machines that were previously sold.
Any modifications and/or the addition of accessories
must be approved and performed by the Manufacturer.
SAFETY - ACCIDENT PREVENTION
The following symbols indicate potentially dangerous
situations. Always carefully read this information and
take the necessary precautions to protect people and
property.
No accident prevention program is effective without the
total cooperation of the person responsible for the ma-
chine operation. Most of the accidents that may occur
in a factory, while working or transporting the machine,
are caused by the failure to comply with the most sim-
ple prudence rules. A careful and prudent user is the
best guarantee against accidents and is a prerequisite
to carry out any accident prevention program.
SYMBOLS
DANGER!
Is used to warn of immediate hazards that
will cause severe personal injury or death.
WARNING!
Is used to call attention to a situation that
could cause severe personal injury.
CAUTION!
Is used to call attention to a situation that
could cause minor personal injury or dam-
age to the machine or property.
!
CONSULTATION
Consult the instruction booklet before
performing any operation.
Summary of Contents for Terra 128B
