3. Mounting
The S2C Link is a rugged product that can be attached to equipment in
numerous ways. The retail packaging includes two methods to adhere the S2C
Link
in
the
end
application.
3.1 Adhesive
Tape
The retail packaged product includes two pieces of weather-resistant, double
sided polyurethane foam adhesive which can be applied to the enclosure to
adhere
the
product
to
a
surface.
The
adhesive
attaches
well
to
rigid
surfaces.
1) Wipe dust from the surface of the S2C Link and apply double sided
tape as shown. Be sure to copy the MEID/IMEI/SIM ID from the bottom
label
if
it
will
not
be
visible
after
installation.
2) Wipe dust from surface of the equipment and press the S2C Link firmly
for
30
seconds.
PN
30093
rev
1
©
NimbeLink
Corp.
2017.
All
rights
reserved.
5
