17
MAN
60
°
40
°
-
+
MAN 4
0° 2:30
C
START
STOPP
ON
OFF
EC
O
DR
YER
ETS 1500/1500F
__________________________________
NOTE:
High-pressure cleaning should not be
used!
____________________________________
p
The walls of the cabinet should be cleaned
with a mild soap solution on a damp cloth.
p
Dust frequently gathers around the air intake
under and on top of the cabinet. This can
cause disturbances in the way the cabinet
functions which can, in turn, lead to a shut-
down.
To avoid this problem, the dust should be
removed by suction from the air intake and
the top of the cabinet at least once a year or
more often depending on the environment
the cabinet is placed in.
CARE
CLEANING
REPLACEMENT PARTS
If the power cord is damaged, it must be im-
mediately replaced, and this must be done only
by the manufacturer, the manufacturer’s service
agent or similarly qualified persons in order to
avoid danger.
SERVICE
Before contacting Service
, you should find out
the name, article and serial number of the cabinet.
This information can be found on the data plate
located inside the cabinet.
Data plate (inside)
Name of the drying cabinet
Article number
Serial number (12 digits)
______________________________________
Follow NIMO instructions when carrying out
repairs or replacing parts.
______________________________________
_____________________________________
NB:
A power cord must be replaced only by
NIMO or authorised service personnel.
_____________________________________
Summary of Contents for ETS 1500
Page 20: ...Gematech Innovation ...
