KSP01/00/12.04.2019
KSP01/00/12.04.2019
10)
Fit the pump body by turning it clockwise until the bo
tt
le is seated well.
7.
Preparing the Product for the Use
9)
Install the unidirectional milk valve in the location below the pump housing.
Make sure that it is seated in place by pushing it as far as possible.
29
11)
Install the suction level adjuster part in the silicone suction diaphragm. Make
sure it is seated properly.
12)
Install the combined silicone suction diaphragm and suction level adjuster on
the upper side of the pump body. Make sure that the frame is fully engaged by
pressing it down.
13)
Fit the funnel cover into the pump housing as shown in the picture and make
sure that it
fi
ts properly.
30
Summary of Contents for HNK-SUTPUMP-01
Page 23: ......