Nimos Micro-Trac, User Manual

Usermanual  

NIMOS Micro-Trac

Page 

13

5 Implements 

Before (de)coupling: stop the machine and disengage all 

hydraulic functions

 (switches 22 and 50 to 57). 

Engage the parking brake

. Read the manual of the implement carefully. 

5.1 Coupling 

¾

Check if coupled implements don't endanger the stability of the machine. Here you will find the  maximum 

weights and dimensions: 

front lift 

  rear lift

distance 

centre of gravity

 to centre front axle:   1000 mm. 

rear axle: 850 mm. 

max. weight of implement  

150 kg.  

  200 kg. 

¾

  Extra implement pump supply’s 21l.min at 3600 Rpm with 175 bar of pressure 

always check the required power of the implement 

¾

  Bolt all pins and strips after coupling implements. 

¾

  Clean dirty quick couplings before coupling. 

¾

  Couple the lift cylinder to the Single Acting quick coupling (H). 

¾

  Couple the swivel cylinder to the Double Acting quick coupling (DW / two couplings). 

¾

  Couple the working hydraulics to the working quick couplings (EW / two couplings). 

¾

  Lower coupled implements when you stop the transporter. 

5.2 Decoupling 

¾

Place the implement on a 

flat

 and 

solid

 underground. 

¾

Decouple all hydraulic hoses. 

¾

Put protection caps and plugs in when the implements are decoupled. 

¾

Disconnect all pins and strips. 

5.3 

Instructions towing the machine 

¾

Shift the reduction in the rear axle in the neutral position (high/low gearing) (lever 12). 

¾

Use the parking brake (13) when you must stop. 

¾

Maximum speed at towing is 3 km/h. 

)

IMPORTANT!

 Don’t tip the platform backward when the rear lift is mounted!