04
05
1
Download and install the app, register or log in,
and power on your vehicle.
2
Ensure the vehicle is safely balanced, and
perform a power-on and off test.
For your safety, your new Ninebot One S2 is not
activated, and the speed and sensitivity are set to
low. You must install the app and follow the
instructions to activate the vehicle before use.
3
Click Find Device to connect to the Ninebot One
S2. You will hear a beep to indicate successful
connection. The phone will then display the
connected icon and data about the vehicle. After
a successful connection, follow the instructions
on the app.
The Ninebot One S2 is set to portable mode when the
vehicle is delivered. If you lift the handle when the vehicle
is powered on, the wheels will stop turning. The vehicle
will run normally when you reset the handle.
You can switch off portable mode on the phone app. If
you do, do not lift the handle when the vehicle is powered
on, or the wheels will still turn and may cause injury.
Portable mode
3
Connection of Charger
4
First Use
You need a smart phone running Android or iOS to download and install the Ninebot
app. After watching the safe driving instructional video and completing the training
for beginners, you can start using the vehicle. Search for Ninebot in an Android
market or Apple’ s App Store, or scan the QR code on the left to download the app.
Scan here to download and install the app.
2
Open the cover of
the charging port
3
Plug the charger
into the unit.
1
Charging port
Keep children away from the vehicle and
charger when it’ s charging.
