background image

10

11

Do not ride Ninebot One S2 on stairs or 
escalators.

Do not ride the vehicle standing on 
one foot.

Do not jump while riding the 
vehicle.

Do not accelerate quickly or 
rock the vehicle back and forth.

•  Ninebot One

®

 S2 is a leisure device. In public areas, it is considered a means of transport with the same 

risks that other types of transport have. Follow the instructions to protect yourself and others.

•  You need to understand that, in public roads, you are subject to risks caused by misconduct or improper 

operations of other vehicles or drivers even if you fully comply with these instructions. Note that your 
braking distance increases the faster you’ re going and that you can pose a hazard to pedestrians and 
cyclists. Be careful that you don’ t slide and lose control on smooth surfaces. Be vigilant, ride at a 
sensible speed, and keep a safe distance from other vehicles. Be vigilant and ride slowly in unfamiliar 
areas.

•  Respect pedestrians' right of way. Do not scare pedestrians, especially children. When you’ re behind 

someone, slow down and give a verbal warning if necessary before passing them. Pass pedestrians on 
the left side in countries where vehicles drive on the right. When someone is approaching from the 
opposite direction, keep to their right and slow down.

•  Strictly follow the safety requirements specified in this user manual if the country where you are does not 

have national standards or regulations on electric self-balancing vehicles. Ninebot Inc. will not assume 
any liability for accidents, injuries, deaths, disputes, conflicts of interest, or property losses that arise 
from your violation of this user manual.

•  Do not let anyone ride the vehicle if they haven't been trained to. To teach a friend how to use the 

Ninebot One S2, set the vehicle into teaching mode for beginners on the app. Instruct your friend to 
wear protective gear and explain the safe riding guidelines. You can also watch or download the 
instructional video by scanning the QR code on the label of the pedal or on the tip card.

•  Perform a basic check on the Ninebot One S2 before each ride. Check for loose parts, punctures or tire 

wear, and abnormal noises or faults when steering. Stop or do not use the device if you find a fault. Use 
the app for troubleshooting. Contact the official customer service or your distributor for maintenance 
services.

8

 Safety Instructions

Summary of Contents for One S2















Reviews: