08
09
5 Learning to Ride
Wear an approved helmet and other protective
gear to minimize any possible injury.
1. Power on the KickScooter and check the
battery level. Charge the KickScooter if the
battery level is low.
3. Put your other foot on the footboard to keep
both feet stable. Press the throttle on the right
hand to speed up when you are balanced.
Note, for your safety, the motor will not
engage until the KickScooter is no less than
1.9 mph (3 km/h).
2. Stand on the footboard with one foot and
push off with another foot to start gliding.
WARNING
4. Slow down by releasing the throttle; and
brake by squeezing the brake lever.
5. Power on the turn signal before turn. To
turn, shift your body weight and turn the
handle slightly. Power off when turn
finished.
* The KickScooter is consistently beep when
the turn signal on.
When hard braking, you risk serious injury due to loss of traction and falls.
Maintain a moderate speed and look out for potential hazards.
