14
www.ninjakitchen.com
E
n
gl
is
h
WARNING: Handle the Pro Extractor Blades
®
Assembly with care, as the blades are sharp.
WARNING: Never leave the appliance unattended while in use.
WARNING: Remove utensils prior to processing. Failure to remove may cause the bowl to be damaged or to
shatter, which may cause personal injury.
CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the
user being burned.
CAUTION: Remove the Pro Extractor Blades Assembly from the cup upon completion of blending. Do not
store ingredients before or after blending in the Nutri Ninja Cup or XL Multi-Serve Ninja Jar with the blade
assembly attached. Some foods may contain active ingredients or release gases which will expand if left
in a sealed container, resulting in excessive pressure buildup that can pose a risk of injury. For storage,
only use Sip & Seal Lid to cover.
IMPORTANT: Make sure that the motor base is plugged in for use.
1
Review warning and caution statements above before
proceeding to number 2.
2
Place the motor base on a clean, dry, level surface such
as a counter or table top. Press down on the motor
base to make sure that the suction cups adhere to the
counter or table top.
3
Add ingredients to the Nutri Ninja Cup or XL Multi-
Serve Ninja Jar.
4
Place the Pro Extractor Blades
®
onto the selected cup
and tightly screw it on clockwise until you have a good
seal.
(Fig. 1)
5
Turn the selected cup upside down and place it onto the
motor base, aligning the tabs on the cup with the motor
base. Rotate the cup clockwise until it locks in place,
you will hear a click when the lock is engaged.
(Fig. 2)
6
Once the cup is engaged, the programs available for
that attachment will illuminate.
(Fig. 3)
The Auto-iQ
™
program will stop the appliance automatically at the end
of the program.
7
To pause the appliance, press the selected speed or
Auto-iQ program a second time.
Fig. 1
Fig. 2
Assembly and Use of the Nutri Ninja
®
Cups or XL Multi-Serve Ninja
®
Jar
Fig. 3
Fig. 4
Fig. 6
ASSEMBLY
USE
REMOVAL
8
Once you have reached your desired consistency,
press the
START/STOP
button to turn the program off.
Turn the cup counter-clockwise and pull straight up to
remove.
(Fig. 4, Fig. 5)
9
Turn the cup upright and remove the Pro Extractor
Blades by twisting the Pro Extractor Blades counter-
clockwise.
(Fig. 6)
10
Do not store blended contents with the Pro Extractor
Blades Assembly attached.
11
Place the Sip & Seal
®
lid onto the Nutri Ninja Cup, twist
to seal and enjoy!
12
For storage, only use Sip & Seal lid to cover.
13
Be sure to store the Pro Extractor Blades Assembly
attached to an empty cup when not in use.
14
Make sure that the motor base is unplugged when not
in use.
15
To release the motor base from
the counter or table top, place your
hands underneath both sides of the
motor base and gently pull the unit
up and towards you.
Fig. 5
or
or
