15
1-877-646-5288
HOW TO CLEAN
CAUTION: Make sure that the motor base is
unplugged from the power source before
inserting or removing any blade assembly and
before cleaning.
CAUTION: DO NOT immerse the motor base into
water or any other liquid.
1
Separate/remove all parts from each other.
2 Hand Washing
: Wash the containers, lids and blade
assemblies in warm, soapy water. When washing the
blade assemblies, use a dish-washing utensil with a
handle to avoid direct hand contact with blades. Handle
blade assemblies with care to avoid contact with sharp
edges. Rinse and air dry thoroughly.
Dishwasher:
The containers, lids and blade
assemblies are all dishwasher safe. The lids and blade
assemblies are top rack dishwasher safe. Ensure that
the blade assemblies are removed from the containers
before placing in the dishwasher.
WARNING: Handle the blade assemblies with care
when washing, as the blades are sharp. Contact
with the blades’ edges can result in laceration.
3
Wipe the motor base clean with a damp cloth.
Please call customer service if any servicing needs to
be performed on the appliance at 1-877-646-5288.
Care & Maintenance
HOW TO STORE
1 Store the Ninja
®
Auto-iQ
™
Compact System upright
with the blade assembly inside the corresponding
container with the lid secured on top. Do not place
anything on top. Store the rest of the attachments in a
safe place where they will not be damaged and won’t
cause harm. Wrap the power cord around the cord
wrap on the back of the motor base.
NOTE: Do not store blended or unblended
ingredients in the Nutri Ninja
®
Cup with the blade
assembly attached.
RESETTING THE MOTOR THERMOSTAT
The Ninja Auto-iQ Compact System features a unique
safety system which prevents damage to the unit’s
motor and drive system should you inadvertently
overload your appliance.
If the appliance is being
overloaded, the motor will stop. Allow the
appliance to cool for approximately 15 minutes.
To reset the appliance, follow the resetting procedure
below:
1
Unplug the appliance from the electrical outlet.
2
Remove and empty the container and ensure that no
food is jamming the blade assembly or attachments.
3
Allow the appliance to cool for approximately 15
minutes.
4
Re-install the container onto the base and re-plug the
appliance into the electrical outlet.
5
Proceed to use the appliance as before making sure not
to exceed the recommended maximum capacities.
