1
Review warning and caution statements above before
proceeding�
2
Place the motor base on a clean, dry, level surface such
as a counter or table top�
3
Make sure that the motor base is plugged in for use�
4
Add ingredients to the cup�
NOTE:
Do not overfill! To avoid spilling, do not add
ingredients past the “MAX” fill line�
5
Place the Pro Extractor Blades Assembly onto the cup
and twist it on tightly until you have a good seal�
(Fig. 1)
6
Turn the cup upside down and place it onto the motor
base, aligning the tabs on the cup with the motor base�
Turn it clockwise, the unit is ready for use�
(Fig. 2)
7
Press down on the top of the cup in short intervals to
activate�
(Fig. 3)
8
When you have reached your desired consistency, stop
the appliance by removing your hand from the cup�
Use of the Nutri Ninja
™
Cups
9
To remove the cup, ensure that the motor has stopped
running� Then turn the cup anticlockwise
(Fig. 4)
and
pull straight up to remove�
(Fig. 5)
10
Turn the cup upright and remove the Pro Extractor
Blades Assembly by twisting the Pro Extractor Blades
Assembly anticlockwise�
(Fig. 6)
11
Do not store blended contents with the Pro Extractor
Blades Assembly attached�
12
Place the Spout lid onto the Nutri Ninja cup, twist to
seal and enjoy�
13
For storage, only use Spout lid to cover�
14
Be sure to store the Pro Extractor Blades Assembly
attached to an empty cup when not in use�
15
Make sure that the motor base is unplugged when not
in use�
16
To remove the motor base unit, tip the unit forward
from the rear to easily disengage the suction cups�
Fig. 3
Fig. 4
Fig. 5
ASSEMBLY
PULSE
REMOVAL
Fig. 2
Fig. 1
or
or
Fig. 6
or
or
WARNING: Handle the Pro Extractor Blades
™
Assembly with care, as the blades are sharp.
WARNING: Remove utensils prior to processing. Failure to remove may cause the Nutri Ninja cup to be
damaged or to shatter, which may cause personal injury.
WARNING: Never leave the appliance unattended while in use.
CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the
user being burned.
CAUTION: Remove the Pro Extractor Blades Assembly from the cup upon completion of blending. Do not store
ingredients before or after blending in the Nutri Ninja
™
cup with the blade assembly attached. Some foods may
contain active ingredients or release gases which will expand if left in a sealed container, resulting in excessive
pressure buildup that can pose a risk of injury. For storage, only use Spout Lid to cover.
IMPORTANT: Make sure that the motor base is plugged in for use.
For best results, use short “
PULSES
”!
Suggested Uses
PURPOSE / FUNCTION
SUGGESTED CUP
TYPE OF FOOD
Chopping / Pulsing
500ml Nutri Ninja
™
cup
650ml Nutri Ninja cup
Salsa
Leafy Herbs
Nuts
Chocolate
Grating
500ml Nutri Ninja cup
650ml Nutri Ninja cup
Cheese
Breadcrumbs
Mixing
500ml Nutri Ninja cup
650ml Nutri Ninja cup
Batters
Dips
Sauces*
500ml Nutri Ninja cup
650ml Nutri Ninja cup
Vinaigrettes
Salad Dressings
Simple Sauces*
Frozen Blending
500ml Nutri Ninja cup
650ml Nutri Ninja cup
Ice
Frozen Fruit
Ice Cream
Nutrient Juices/Smoothies
500ml Nutri Ninja cup
650ml Nutri Ninja cup
Fruits
Vegetables
Leafy Greens
FILLING YOUR NUTRI NINJA
™
Want to create smooth and delicious drinks using your Nutri Ninja cups? Simply
add ingredients to the container in the order they appear in each recipe, or follow
the guideline below when creating your own customised recipes�
(Fig. 1)
fresh fruits,
vegetables
leafy greens,
herbs
powders,
nut butters
ice,
frozen ingredients
liquids, yoghurt
Fig. 1
CAUTION: DO NOT process dry ingredients without adding liquid to the cup. This product is not intended for
dry blending.
* When blending sauces, make sure they’re cooled to room temperature first - Ninja
™
containers are not intended for hot
blending�
8
9
SG
+65 800 120 5111 |
MY
+60 1800 803 915
ninjakitchen.sg | ninjakitchen.my
