7
ninjakitchen.sg | ninjakitchen.my
6
SG
+65 800 120 5111
MY
+60 1800 803 915
PARTS
A
B
C
D
H
Pump
Release
Twist off
Battery
Assembly
G
F
E
BEFORE FIRST USE
IMPORTANT:
Review all warnings
on pages 2–5 before proceeding.
DID YOU KNOW?
• You can take your drinks on the go
using the Spout Lids�
• The containers, blade assemblies, and
lids are BPA free and dishwasher safe�
INSTALLING THE BATTERIES
1
Unscrew the FreshVac™ Pump’s power
button cap and remove the spring-
loaded battery cover�
2
Install 6 AA alkaline batteries
(included), ensuring the +/- symbols
on the batteries match
the markings on the battery cover
and battery housing�
3
Replace the battery cover, making sure it
is fully seated and clicked in place�
4
Screw on the pump’s power button cap�
USING THE OPTIONAL FRESHVAC
POWER CORD:
If you prefer to power your FreshVac
Pump using a power cord, you may
purchase one on ninjakitchen�com
1
Insert the mains plug into an electrical
socket�
2
Insert the barrel connector (small
round end of the power cord) into the
port on the pump�
3
When the power cord is correctly
attached, you will be able to turn on
the FreshVac Pump�
The power cord must only be supplied for
safety at extra low voltage corresponding to
the marking on the appliance�
NOTE:
Use only an optional power
cord manufactured by SharkNinja�
Other after-market adapters are not
compatible with the FreshVac™ pump�
NOTE:
If the battery cover and power
button cap are not properly installed
or tightly in place, the pump will
not function�
NOTE:
All attachments are dishwasher
safe� It is recommended that the lids,
containers and blade assemblies
be placed on the top rack of the
dishwasher� Ensure blade assemblies
and lids are removed from their
containers before placing in the
dishwasher� Exercise care when
handling blade assemblies� Overflow
reservoir is hand wash only�
Make sure Flip & Seal Lid is open
during dishwasher cycle.
NOTE:
Handle the Pro Extractor
Blades™ Assembly by grasping around
the perimeter of the blade assembly
base�
1
Remove all packaging materials
from the appliance� Exercise care
when unpacking blade assemblies�
All blade assemblies are sharp�
2
Wash containers, lids, and blade
assemblies in warm, soapy, water
using a dishwashing utensil with
a handle to avoid direct contact
with the blades� Exercise care when
handling blade assemblies, as the
blades are sharp�
3
Thoroughly rinse and air-dry all parts�
4
Wipe screen with a soft, damp
cloth� Allow it to dry completely
before using�
If light blinks white and green,
replace batteries or make sure
they’re properly installed�
White Light:
Vacuum sealing
in progress
Green Light:
Vacuum sealing
complete
