10
11
SG
+65 800 120 5111
MY
+60 1800 803 915
ninjakitchen.sg | ninjakitchen.my
5
To vacuum seal the cup, place the
pump over the tab� Press the power
button on top of the pump to begin
vacuum sealing� The pump will make
a motorised noise and the light on
the pod will illuminate in white while
vacuum sealing is in progress� You
do not need to hold the pump in
place while vacuum sealing�
8
Close the Flip & Seal Lid� Press it
closed until it clicks into place�
9
To blend ingredients, follow
instructions on page 12�
When blending is complete, pressure
must be released from the cup
through the FreshVac™ Tab before
opening the lid� See step 7 on the
next page for more information�
6
When vacuum sealing is complete,
the pump will shut off automatically
and the green light on the pump
will illuminate�
7
To release the pump from the cup,
press the pump release button on
the bottom front of the pump and lift�
IMPORTANT:
Do not use FreshVac™
Pump after blending, as this could
damage your pump�
IMPORTANT:
Review all warnings
on pages 2–5 before proceeding.
SINGLE-SERVE FRESHVAC™ CUP
WITH VACUUM SPOUT LID
1
Place the unplugged motor base on a
clean, dry, and level surface such as a
worktop or table� Press downward on
the motor base to adhere the suction
cups to the work surface� Plug the
motor base into a socket�
2
Add ingredients to the Single-Serve
Cup�
DO NOT
add ingredients past
the
MAX LIQUID
line on the cup�
5
If using a pre-set program, select
the program that best suits your
recipe� The pre-set feature will
automatically stop the unit at the
end of the program� To pause
the unit at any time, press the
currently active program a
second time� Reference page 9
for program descriptions�
4
Turn the Single-Serve Cup upside
down and install onto the motor
base� Align the tabs on the cup with
the slots on the base, then twist
until it clicks into place� When the
unit is connected to power and
the container is correctly locked
onto the motor base, the program
buttons will illuminate and the unit
will be ready for use�
3
Install the Pro Extractor Blades™
Assembly onto the top of the cup�
Twist the lid clockwise until it’s
sealed tightly�
VACUUM BLENDING
WITH THE SINGLE-SERVE FRESHVAC™ CUP - CONT
