13
ninjakitchen.sg | ninjakitchen.my
12
SG
+65 800 120 5111
MY
+60 1800 803 915
6
When blending is complete,
remove the cup from the motor
base and place on the worktop with
the Pro Extractor Blade Assembly
on the bottom� To remove the cup
from the motor base, turn the cup
anti-clockwise and then lift it�
8
Close the Flip and Seal Lid—you
will hear a click when it is
properly closed�
9
Remove the Pro Extractor Blade
Assembly and place the vacuum
spout lid on the cup to take your
blended contents on the go�
10
Unplug the unit when finished� To
release the motor base, place your
hands underneath both sides of the
motor base and gently pull the unit
up and towards you� Refer to page
14 for storing instructions�
7
Open the flip-top vacuum-seal lid
and pull on the green release tab
to release the vacuum seal� You
will not be able to remove the lid
without releasing the vacuum seal�
DO NOT PULL TAB OUT
TRADITIONAL BLENDING INSTRUCTIONS
IMPORTANT:
Review all warnings
on pages 4–7 before proceeding.
2
Place the Pro Extractor Blades™
Assembly on the top of the cup
and turn clockwise to seal�
3
Turn cup upside down so the Flip &
Seal Lid is on top and the bottom
of the blade assembly is flat on the
worktop flat on the counter�
1
Add ingredients to the FreshVac
Cup�
DO NOT
add ingredients past
the
MAX LIQUID
line on the cup�
Non vacuum blending recommended
for whipped desserts that benefit from
added air and frozen drinks with highly
frozen ingredients for thicker results�
5
If using a pre-set program, select
the program that best suits your
recipe� The pre-set feature will
automatically stop the unit at the
end of the program� To pause
the unit at any time, press the
currently active program a
second time� Reference page 11
for program descriptions�
4
Turn the Single-Serve FreshVac
Cup upside down and install onto
the motor base� When the unit is
correctly locked into the motor
base, program lights will illuminate�
