E
n
gl
is
h
14
15
www.ninjakitchen.com
1-877-646-5288
WARNING: Handle the Pro Extractor Blades
®
Assembly with care, as the blades are sharp.
WARNING: Remove utensils prior to processing. Failure to remove may cause the Nutri Ninja cup to be
damaged or to shatter, which may cause personal injury.
WARNING: Never leave the appliance unattended while in use.
CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the
user being burned.
CAUTION: Remove the Pro Extractor Blades Assembly from the cup upon completion of blending. Some
ingredients have the potential to expand after blending resulting in excessive pressure buildup that can
pose a risk of injury.
IMPORTANT: Make sure that the motor base is plugged in for use.
10
Review warning and caution statements on page 13
before proceeding.
NOTE:
Nutri Ninja
®
|
Ninja
®
Blender Duo
™
with
AUTO-iQ
™
Technology can sense which jar is on
the motor base. The function lights will illuminate
depending on which jar is placed on the motor base.
(Fig. 6)
11
Press the power button to turn on the unit. Select
the speed or AUTO-iQ Program that best suits your
needs. The AUTO-iQ program will stop the appliance
automatically at the end of the program.
(Fig. 7)
12
To pause the appliance, press the selected speed or
AUTO-iQ Program a second time. When the program is
paused, the light on the program button will flash until
you press it again to resume the rest of the program.
13
When you have reached your desired consistency, stop
the appliance by pressing the power button ( ) and
wait for the Stacked Blade Assembly to stop turning.
(Fig. 8)
Fig. 8
USE
REMOVAL
Fig. 6
Fig. 9
AUTO
Fig. 7
Fig. 10
NOTE:
Nutri Ninja
®
| Ninja
®
Blender Duo
™
with AUTO-iQ
™
Technology can sense which jar is on the motor base. The
function lights will illuminate depending on which jar is
placed on the motor base.
(Fig. 1)
1
Review warning and caution statements above before
proceeding to number 2.
2
Place the motor base on a clean, dry, level surface such
as a counter or table top. Press down on the motor
base to make sure that the suction cups adhere to the
counter or table top.
3
Add ingredients to the Nutri Ninja cup.
4
Place the Pro Extractor Blades Assembly onto the cup
and tightly screw it on clockwise until you have a good
seal.
(Fig. 2)
5
Turn the Nutri Ninja cup upside down and place it onto
the motor base, aligning the tabs on the cup with the
motor base. Rotate the Nutri Ninja cup clockwise until
it locks in place, you will hear a click when the lock is
engaged.
(Fig. 3)
6
Press the power button on, and select the speed or
AUTO-iQ program that suits your needs. The AUTO-iQ
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
ASSEMBLY
USE
REMOVAL
program will stop the appliance automatically at the end
of the program.
(Fig. 4)
7
To pause the appliance, press the selected speed or
AUTO-iQ Program a second time. When the program is
paused, the light on the program button will flash until
you press it again to resume the rest of the program.
8
Once you have reached your desired consistency, stop
the appliance by pressing the power button and wait
for the blade to stop turning. Turn the Nutri Ninja cup
counter- clockwise and pull straight up to remove.
(Fig. 5, Fig. 6)
NOTE:
Do not overfill! To avoid spilling, do not add
ingredients past the “Max Liquid” line.
9
Turn the cup upright and remove the Pro Extractor
Blades Assembly by twisting the blade assembly
counter- clockwise.
10
Place the Sip & Seal
®
lid onto the Nutri Ninja cup, twist
clockwise to seal and enjoy!
11
Make sure that the motor base is unplugged when not
in use.
AUTO
Fig. 1
14
Turn the pitcher counter clockwise to remove and then
lift off the base.
(Fig. 9)
WARNING: Never insert your hands in the pitcher
as the Stacked Blade Assembly is sharp. Always
use a spatula to dislodge food that has stuck to
the sides of the pitcher.
15
Open the pour spout cap and use the spout to empty
liquid contents.
16
For thicker consistencies, first remove the lid by
pressing the release button and pulling the lid handle
up to a 90 degree angle to lift lid off the pitcher. Then,
carefully remove the Stacked Blade Assembly by the
top of the shaft. Place Stacked Blade Assembly away
from the work area to avoid accidental contact. Finally,
empty contents from the pitcher.
(Fig. 10)
17
Make sure that the unit is unplugged when not in use.
Assembly and Use of the Pitcher - cont.
Assembly and Use of the Nutri Ninja
™
Cups
