background image

1

2

CUSTOMER CARE - AU: 1800 099 385

CUSTOMER CARE - NZ: 0800 112660

IMPORTANT SAFETY INSTRUCTIONS

For Household Use Only

WHEN USING ELECTRICAL APPLIANCES, 

BASIC SAFETY PRECAUTIONS SHOULD 

ALWAYS BE FOLLOWED, INCLUDING THE 

FOLLOWING:
READ ALL INSTRUCTIONS BEFORE USING 

YOUR NUTRI NINJA

®

 | NINJA

®

 BLENDER DUO 

WITH AUTO-IQ

®

 TECHNOLOGY.

  

WARNING:

 

Extension cords are not 

recommended for use with this product.

  

 

WARNING:

 

The blades are not 

affixed to the unit. They are removable 

and very sharp. Handle with care!

  

 

CAUTION: 

ln order to avoid a 

hazard due to inadvertent resetting of 

the thermal cut-out, this appliance must 

not be supplied through an external 

switching device, such as a timer, or 

connected to a circuit that is regularly 

switched on and off by the utility.

IMPORTANT:

 This appliance is not 

intended for use by persons with reduced 

physical, sensory or mental capabilities, 

or lack of experience and knowledge, 

unless they have been given supervision or 

instruction concerning use of the appliance 

by a person responsible for their safety.
Children shall not use or play with this 

appliance. Close supervision is necessary 

to keep appliance and cord out of reach of 

children during use.

26  To reduce the risk of injury, NEVER operate the 

appliance without the lid in place; DO NOT try to 

defeat or bypass the interlock mechanism. When 

using the removable blades, make sure they are 

properly installed before operating the appliance.

27  DO NOT expose containers to extreme temperature 

changes. 

28  DO NOT overfill. DO NOT exceed “MAX” fill line.
29  DO NOT let the power cord hang over the edge of table 

or counter or touch hot surfaces such as the stove. 

30  DO NOT operate the appliance empty.
31  To reduce the risk of burns, always allow the 

appliance to cool before taking off parts and  

before cleaning. 

32  Max ON time is 60 seconds under 1500W load. 

If the appliance overheats, a thermal switch will 

become activated and shut off the motor. To reset, 

unplug the appliance and let it cool down for 

approximately 15 minutes before using again.

33  In the event that the unit overloads, the control 

panel lights will flash and the unit will shut down. 

Unplug the appliance and let it cool down for 

approximately 15 minutes before using again.

34  Max PULSE iteration is 30 Pulses. After 30 Pulses 

allow 10 minutes to pass before running the PULSE 

function up to an additional 30 Pulses.

35  The maximum rating is based on the Stacked Blade 

Assembly (pitcher) that drives the greatest power 

and other recommended attachments may draw 

significantly less power or current.

36  To avoid injury, never attempt to place the Pro Extractor 

Blade

 Assembly onto the motor base without first 

assembling the blade assembly to the Nutri Ninja Cup.

37  Appliance accessories are not intended to be used in the 

microwave as it may result in damage to the accessories.

38  THIS PRODUCT IS INTENDED FOR HOUSEHOLD 

USE ONLY. Do not use this appliance for anything 

other than its intended use. Do not use outdoors.

39  DO NOT remove lid until blade has COMPLETELY 

STOPPED.

40  DO NOT attempt operation without the cover being 

in place.

41  DO NOT process liquid ingredients in the coffee 

grinder. Accessory is not intended for liquid 

processing.

42  DO NOT attempt to chop ice in the coffee grinder.
43  Check stainless steel cup and coffee grinder for 

presence of foreign objects before using.

10  Never leave an appliance unattended when in use.
11  Turn the appliance off and remove the power cord 

from the electrical outlet when not in use, before 

assembling or disassembling parts, accessing parts 

that move while in use and before cleaning. To 

unplug, grasp the plug and pull from the electrical 

outlet. Never pull from the power cord.

12  DO NOT abuse the power cord. Never carry the 

appliance by the power cord or yank it to disconnect 

from electrical outlet; instead, grasp the plug and 

pull to disconnect.

13  DO NOT use with damaged supply cord or plug. If the 

supply cord or plug is damaged, it must be replaced by 

the manufacturer, a service center or similar qualified 

persons in order to avoid hazard.  

14  DO NOT USE if the appliance is not working, has been 

dropped, dropped into water, damaged or left outdoors.

15  NO SERVICEABLE PARTS. Incorrect re-assembly or 

repair can cause a risk of electrical shock or injury 

to persons when the appliance is used. Contact 

Customer Service or a Service Center for the repair or 

replacement under the warranty agreement.

16  Always use the appliance on a dry, level surface.
17  Keep hands, hair, clothing, as well as utensils out 

of container while processing or blending to reduce 

the risk of severe injury to persons or damage to the 

appliance. A scraper may be used but only when the 

appliance is not running.

18  Avoid contact with moving parts.
19  DO NOT attempt to sharpen blades.
20  DO NOT use the appliance if either set of blades are 

bent or damaged.

21  To reduce the risk of injury, never assemble the 

Stacked Blade Assembly in the pitcher without the 

pitcher being properly attached to the motor base.

22  DO NOT operate this appliance on or near any hot 

surfaces (such as gas or electric burner or in a 

heated oven).

23  The use of attachments or accessories including 

canning jars, not recommended by the manufacturer 

may result in fire, electric shock or personal injury.

24  DO NOT remove any container from the motor base 

while the appliance is in operation. Always unplug 

the unit when not in use.

25  To reduce risk of injury, never place the blade 

assemblies on the base without the pitcher or Nutri 

Ninja

®

 Cup properly attached.

 WARNING: 

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK 

OR INJURY:

 WARNING: Remove utensils prior to 

processing. Failure to remove may cause the 

jar to be damaged or to shatter which may 

cause personal injury.

 WARNING: The blade assemblies are 

sharp, not locked in place and removable, 

handle with care. When handling the blade 

assemblies, always hold by the shaft. Failure 

to do so will result in a risk of laceration.

 WARNING: Stacked Blade Assembly is 

sharp and not locked in place. If using the pour 

spout, ensure the lid is fully locked onto the 

pitcher. If pouring with the lid removed, 

carefully remove the Stacked Blade Assembly 

first, holding it by the shaft. Failure to do so 

will result in a risk of laceration.

4

 

 CAUTION: Do not blend hot liquids, doing 

so may cause excessive pressure build-up, 

resulting in risk of the user being burned. 

 CAUTION: We do not recommend grinding 

in any of our Nutri Ninja

®

 Cups.

 CAUTION: Remove the Pro Extractor Blades 

Assembly from the Nutri Ninja Cup upon 

completion of blending. Do not store ingredients 

before or after blending them in the cup with the 

blade assembly attached. Some foods may 

contain active ingredients or release gases that 

will expand if left in a sealed container, resulting 

in excessive pressure buildup that can pose a 

risk of injury. For ingredient storage in the cup, 

use only Sip & Seal

®

 Lid or spout lid to cover.

7  

 CAUTION: Do not blend dry ingredients 

unless pulsing for short intervals per the 

instructions. Continuous blending dry 

ingredients will overheat the blender.

8  To protect against electrical shock, do not submerge 

the appliance or allow the power cord to come into 

contact with water or any other liquid.

9  DO NOT allow the appliance to be used by children. 

Close attention is necessary when used near 

children. This is not a toy.

SAVE THESE  

INSTRUCTIONS

Summary of Contents for BL642ANZMN










Reviews: