9
10
CUSTOMER CARE - AU: 1800 099 385
CUSTOMER CARE - NZ: 0800 112660
Fig. 2
or
or
Fig. 3
Fig. 1
Assembly and Use for the Nutri Ninja
®
Cups
IMPORTANT: When processing soft dry
ingredients such as day-old bread or cheese
use quick, short 1 second pulses. Do not overfill
to avoid overheating the appliance. Allow the
appliance to cool after each use.
NOTE:
Nutri Ninja | Ninja
®
Blender Duo with Auto-iQ
®
Technology can sense which jar is on the motor base.
The available function lights will illuminate depending
on which jar is placed on the motor base.
(Fig. 1)
1 Review warning and caution statements above
before proceeding to number 2.
2
Place the motor base on a clean, dry, level surface
such as a counter or tabletop. Press down on the motor
base to make sure that the suction cups adhere to the
counter or tabletop.
3
Add ingredients to the Nutri Ninja Cup.
4
Place the Pro Extractor Blades Assembly onto the cup
and tightly screw it on clockwise until you have a good
seal.
(Fig. 2)
5
Turn the Nutri Ninja Cup upside down and place it onto
the motor base, aligning the tabs on the cup with the
motor base. Rotate the Nutri Ninja Cup clockwise until
it locks in place, you will hear a click when the lock is
engaged.
(Fig. 3)
ASSEMBLY
WARNING: Handle the Pro Extractor Blades
™
Assembly with care, as the blades are sharp.
WARNING: Remove utensils prior to processing. Failure to remove may cause the Nutri Ninja Cup to be
damaged or to shatter, which may cause personal injury.
WARNING: Never leave the appliance unattended while in use.
CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the
user being burned.
CAUTION: Remove the Pro Extractor Blades Assembly from the Nutri Ninja Cup upon completion of
blending. Do not store ingredients before or after blending them in the cup with the blade assembly
attached. Some foods may contain active ingredients or release gases that will expand if left in a sealed
container, resulting in excessive pressure buildup that can pose a risk of injury. For ingredient storage in
the cup, use only Sip & Seal
®
Lid or spout lid to cover.
Fig. 4
Fig. 5
Fig. 6
6
Review warning and caution statements on page 9
before proceeding.
7
Press the power button on, and select the speed or
Auto-iQ program that suits your needs.
(Fig. 4)
The
Auto-iQ program will stop the appliance automatically
at the end of the program.
8
To pause the appliance, press the selected speed or
Auto-iQ program a second time. When the program is
paused, the light on the program button will flash until
you press it again to resume the rest of the program.
9
Once you have reached your desired consistency, stop
the appliance by pressing the power button and wait for
the Pro Extractor Blades Assembly to stop turning. Turn
the Nutri Ninja
®
Cup anticlockwise and pull straight up
to remove.
(Fig. 5, Fig. 6)
NOTE:
Do not overfill! To avoid spilling, do not add
ingredients past the “MAX” fill line.
10
Turn the cup upright and remove the Pro Extractor
Blades Assembly by twisting the Pro Extractor Blades
Assembly anticlockwise.
11
Do not store blended contents with the Pro Extractor
Blades attached.
12
Place the Sip & Seal Lid onto the Nutri Ninja Cup, twist
to seal and enjoy.
13
For storage, only use Sip & Seal Lid to cover.
14
Be sure to store the Pro Extractor Blades attached to an
empty cup when not in use.
NOTE:
Sip & Seal Lid not intended for use with the XL
Multi-serve 1.4 L Ninja Jar.
15
Make sure that the motor base is unplugged when not
in use.
16
To release the motor base from the
counter or tabletop, place your hands
underneath both sides of the motor
base and gently pull the unit up and
towards you.
USE
REMOVAL
or
or
Fig. 6
AUTO
Summary of Contents for BL642ANZMN
Page 1: ...BL642ANZMN OWNER S GUIDE...
