Ninja BL772, Owner'S Manual

15

TOLL FREE:

1-877-646-5288

HOW TO CLEAN

CAUTION:

 Make sure that the motor base is unplugged 

from the power source before inserting or removing any 
attachment and before cleaning.

CAUTION:

 DO NOT immerse the motor base into water 

or any other liquid.  

1

  Separate/remove all parts from each other.

2

  Clean the motor base with a damp cloth and wipe dry.  

3

  Place the pitcher, single serve cup and bowl in the 

dishwasher. Place the lids and attachments on the 
top rack. 

Use caution when handling the blade 

assemblies as the blades are very sharp. 

NOTE: 

You may also wash the containers by filling 

¾

of the container with warm water and a drop of dish 
washing detergent, placing the corresponding lid on the 
container and pressing the pulse button a few times.  
Once clean, remove the container from the motor base.  
Rinse the container, attachment and lid under running 
water. Allow all the parts to dry before storing.

Please call customer service if any servicing needs to be 
performed on the appliance at 1-877-646-5288.

Care & Maintenance

HOW TO STORE

1

  Store the Ninja

®

 Mega Kitchen System upright with the 

pitcher on the motor base, 6-Blade assembly inside the 
pitcher and lid on the pitcher. Do not place anything on 
top. Store the bowl with the 4-Blade assembly inside 
and the lid on top. Store the single serve cup and the 
rest of the attachments along side the appliance or 
in a cabinet where they will not be damaged and 
won’t cause a hazard. 

RESETTING THE MOTOR THERMOSTAT

The Ninja

®

 Mega Kitchen System features a unique 

safety system which prevents damage to the unit’s 
motor and drive system should you inadvertently 
overload your appliance. If the appliance is being 
overloaded, the motor will stop and the power light will 
remain lit and speeds 1, 2 and 3 will flash. To reset the 
appliance, follow the resetting procedure below:

1

  Unplug the appliance from the electrical outlet.

2

  Remove and empty the container and ensure 

that no food is jamming the cutting blades or 
attachments.

3

  Allow the appliance to cool for approximately 15 

minutes.

4

  Re-install the container onto the base and re-plug 

the appliance into the electrical outlet.

5

  Proceed to use the appliance as before making 

sure not to exceed the recommended maximum 
capacities.

BL772_30_IB_ENG_120627_2.indd   15

12-06-27   12:30 PM