Ninja Kitchen System Pulse BL200NZ, Owner'S Manual

10

CUSTOMER CARE - AU: 1800 890 840

Assembly and Use for the Shredding/Slicing and Grating Discs

Fig. 12

Fig. 14

Fig. 15

On/Off 
Switch

IMPORTANT: 

Never feed food by hand. Always use the 

food pusher to add food through the feeder tube on the 
fully assembled unit.

IMPORTANT: 

Avoid contacting moving parts. 

1

  Place the motor base on a clean, dry, level surface such 

as a counter or table top. 

2 

Align and lower the bowl onto the motor base. Handle 
should be aligned slightly to the left of the “

LOCK

” 

symbol on the motor base.

3

  Rotate the container to the left as far as it will go to lock 

in place. 

4

  Insert the spindle into the bowl.

 (Fig. 12)

5

  Hold the disc by the plastic hub and carefully place 

the shredding/slicing disc or the grating disc onto the 
spindle. 

(Fig. 13)

CAUTION: 

Shredding/Slicing Disc and Grating Disc are sharp! Handle with care. Make sure that the appliance 

is unplugged from the power source before inserting or removing the shredding/slicing or grating disc and 
before cleaning. 

Fig. 13

Or

6

  Holding the lid by the feeder tube, place it on top of the 

bowl aligning the on/off switch with the bowl’s handle. 

(Fig. 14)

7

  Place food into the feeder tube. Using the food pusher, 

add food through the feeder tube. Push the on/off 
switch forward to the “On” position.

 (Fig. 15)

8

  When you have finished slicing, shredding or grating, 

release the on/off switch to turn the appliance off. Wait 
for the disc to stop turning and then remove the lid. 

9

  Hold the disc by the hub to remove and then remove the 

spindle. Empty the food from the bowl.

10

  The spindle, shredding/slicing disc, grating disc, lid and 

food pusher are all top rack dishwasher safe.

CAUTION: SHREDDING/SLICING DISC AND 
GRATING DISC ARE SHARP! HANDLE CAREFULLY 
WHEN CLEANING.