background image

2

www.sharkninjamanuals.com

23

  To reduce the risk of injury, 

NEVER 

operate the 

appliance without the splash guard in place; 

DO NOT 

try to defeat the interlock mechanism; 

make sure that the cutting blades are properly 

assembled before operating the appliance. 

24

 

DO NOT

 use outdoors.

25

 

DO NOT 

use appliance for other than intended 

use. 

26

  If the appliance overheats, a thermal switch will 

become activated and shut off the motor. To 

reset, unplug the appliance and let it cool down 

for approximately 10 minutes before using again.

27

  The use of accessory attachments, including 

canning jars not recommended by EURO-PRO 

Operating LLC may cause fire, electrical shock or 

risk of personal injury.

NOTE: 

This unit has a short power supply cord to 

reduce the risk resulting from becoming entangled in 

or tripping over a long cord. An extension cord may be 

used if you are careful in its use. 

1

   If using an extension cord, the electrical rating 

of the extension cord should be rated at least 

15 amperes. Extension cords rated for less 

amperage may overheat.

 An extension cord must be arranged so that it 

will not drape over the countertop or tabletop 

where it can be pulled on by children or tripped 

over accidentally.

11

 

DO NOT

 operate the appliance empty.

12

  Extreme caution must be used when moving an 

appliance containing hot food, water or other 

liquids.

13

  Use this appliance on a stable work surface 

away from water.

14

 

DO NOT

 remove the motor head before the 

chopping blades have stopped turning. 

15

 

CAUTION! 

Chopping blades are sharp, handle 

with care. When handling the chopping blades, 

always hold by the plastic shaft.

16

 

DO NOT

 attempt to sharpen blades.

17

 

DO NOT 

expose the pitcher or bowl to extreme 

temperature changes.

18

 

DO NOT 

use the pitcher or bowl if it is cracked 

or chipped.

19

 

DO NOT 

use the appliance if chopping blades 

are bent or damaged.

20

  Avoid contact with moving parts at all times. 

Keep hands, hair, clothing as well as spatulas 

and other utensils away from pitcher or chopping 

bowl during operation to prevent risk of personal 

injury and /or damage to the appliance.

21

 

 CAUTION: DO NOT PROCESS HOT FOODS 

OR HOT LIQUIDS.

 Allow hot ingredients to cool 

before processing. 

22

  Immediately release the On/Off pulse button on 

the motor head in the event that the appliance 

malfunctions during use. 

SAVE THESE 

INSTRUCTIONS

Summary of Contents for Master Prep QB900 series

















Reviews: