www.ninjakitchen.com
9
12
Make sure that the blades have
stopped completely before removing
the power head.
13
If the ingredients stick to the side
of the processing bowl, stop the
appliance, remove the power head
and the splash guard. Use a spatula to
dislodge the pieces and then replace
the splash guard and the power head.
Continue processing.
14
Remove the blade assembly by its shaft
before you empty the contents of the
processing bowl.
15
Place the storage lid onto the top of
the processing blowl and close the flap
to store. (
Fig. 6
)
HINTS & TIPS FOR USING YOUR NINJA
®
EXPRESS CHOP
™
• For mincing, chopping and pureeing,
increase the length of pulses.
• For coarse chopping, use short, quick
pulses and monitor food texture.
• Pre-cut larger pieces to make them
fit into the
processing bowl
. When
chopping hard foods cut into 1-inch
cubes.
7
Place the power head on top of the
splash guard making sure that it is
securely in place. (
Fig. 4
)
8
To start the appliance, plug the power
cord into the electrical outlet, securely
hold power head while operating
and press on the on/off pulse button
located on the top of the power head.
(
Fig. 5
)
9
Hold the proccesing bowl firmly while
depressing the on/off pulse button to
ensure the unit stays in place.
NOTE:
DO NOT
operate the appliance
continuously for more than 15 seconds
at a time.
Be careful not to over
process. For coarsely chopped foods,
use repeated short pulsing action until
the desired consistency is reached.
10
To stop the appliance, remove your
fingers from the on/off pulse button.
11
In order to obtain a better quality of
chopping, operate the appliance by
using the “pulse” method.
Fig. 4
Fig. 5
Fig. 6
