6
ninjakitchen.co.uk
5
ninjakitchen.co.uk
The Ninja
®
Professional Stackable Chopper is an essential tool that is perfect for chopping and pureeing when preparing
your favorite recipes. For best results, be sure to carefully read all the instructions contained in the manual before using
this appliance.
200 Watt Power Head
The 200 watt power head operates on 220-240V~ 50-60Hz electrical power.
NEVER
allow the power head to become
wet when plugged into the mains power supply
WARNING:
The power head should never be immersed in water or any other liquid.
CAUTION:
Make sure that the power head is unplugged from the mains power supply and that the blades have stopped
turning before attaching or removing any accessory.
CAUTION: Blades are sharp! Handle with care, especially when removing the blade from the bowl, emptying
the bowl and during cleaning Use extreme caution when handling the blades. Always hold them by the
shaft. Do not attempt to sharpen blades.
IMPORTANT: Never run the appliance empty.
Getting Started
Using the Ninja
®
Professional Stackable Chopper
CAUTION:
Blades are sharp! Use extreme caution
when handling the blades. Always hold them by
the shaft.
IMPORTANT:
Never run the appliance empty.
1
Place the processor bowl on a clean, dry, level surface.
2
Holding the chopping blade by the shaft, carefully place it
over the spindle pin inside the processing bowl.
(Fig. 1)
IMPORTANT:
Always assemble the blades inside
the container.
WARNING: DO NOT
try to place the blades onto the
power head and then into the Ninja
®
Professional
Stackable Chopper.
3
Carefully spin the blade worktop clockwise to make
sure that it has inserted properly.
(Fig. 2)
4
Place the food ingredients into the bowl.
IMPORTANT:
Never add ingredients into the processing
bowl before placing the blade assembly in first.
CAUTION: DO NOT
add ingredients past the 450
ml mark or 250 ml liquid ingredients as this may
cause overflow.
5
Place the splash guard / storage lid on the bowl.
(Fig. 3)
CAUTION: DO NOT
operate without the splash guard
in place.
6
Open the flap on the splash guard.
(Fig. 3)
Shaft
Fig. 1
Fig. 2
Fig. 3
Open Flap