7
8
www.ninjakitchen.eu
0800 862 0453
Using the Ninja
®
Professional Stackable Chopper
Stacking & Storing
• Place the lid securely on the bowl and close the flap to
store.
• Remove the chopping blade when storing the bowls
with food inside.
• The bowls can be stacked for storing in the refrigerator
or cabinet.
(Fig. 7)
NOTE:
The bowls do not lock together when stacked for
storage. Be careful when removing stacked bowls from
the refrigerator or cabinet.
• Use a dry erase marker to write the date or contents in
the indicator area if so desired. To remove the dry erase
marker, wipe clean with a damp cloth.
CAUTION:
Blades are sharp! Use extreme caution
when handling the blades. Always hold them by the
shaft.
CAUTION: DO NOT PROCESS HOT FOODS OR
HOT LIQUIDS.
Allow hot ingredients to cool before
processing.
IMPORTANT:
Never run the appliance empty.
1
Place the processor bowl on a clean, dry, level surface.
2
Holding the chopping blade by the shaft, carefully place it
over the spindle pin inside the processing bowl.
(Fig. 1)
IMPORTANT:
Always assemble the blades inside the
container.
WARNING: DO NOT
try to place the blades onto the
power head and then into the
Ninja
®
Professional
Stackable Chopper.
3
Carefully spin the blade anticlockwise to make sure that
it has inserted properly.
(Fig. 2)
4
Place the food ingredients into the bowl.
IMPORTANT:
Never add ingredients into the processing
bowl before placing the blade assembly in first.
CAUTION: DO NOT
add ingredients past the 450 ml
mark or 250 ml liquid ingredients as this may cause
overflow.
5
Place the splash guard / storage lid on the bowl.
(Fig. 3)
CAUTION: DO NOT
operate without the splash guard in
place.
6
Open the flap on the splash guard.
(Fig. 3)
7
Place the power head on top of the splash guard
making sure that it is securely in place.
(Fig. 4)
8
To start the appliance, plug the power cord into the
mains power supply. While holding the power head,
press down on the paddle located on top of the power
head in short intervals.
(Fig. 5)
9
Hold the bowl while pulsing the On/Off paddle to ensure
the unit stays in place.
NOTE: DO NOT
operate the appliance continuously for
more than 15 seconds at a time. Be careful not to over
process. For coarsely chopped foods, use repeated
short pulsing action until the desired consistency is
reached.
10
To stop the appliance, remove your fingers from the on/
off paddle.
11
For best results, press the on/off paddle in short
pulses.
12
Make sure that the blades have stopped completely
before removing the power head.
13
Remove the blade assembly by its shaft before you
empty the contents of the processing bowl.
14
Place the storage lid onto the top of the processing
bowl and close the flap to store
. (Fig. 6)
Shaft
Fig. 1
Fig. 2
Fig. 3
Open Flap
Fig. 4
Fig. 5
Fig. 6
Fig. 7
