www.sharkninjamanuals.com
12
Using the Nutri Ninja
®
2-in-1 Blender Pitcher
(may not be included)
IMPORTANT: Never run the appliance empty.
1
Place the Nutri Ninja 2-in-1 Blender Pitcher on a clean,
dry, level surface.
2
Holding the 6 blade assembly by the shaft, place it onto
the spindle pin inside the Blender Pitcher.
(Fig. 17)
NOTE:
Use
ONLY
the 6 blade in the 1.5 L pitcher.
Fig. 17
3
Add the ingredients to be processed into the Blender
Pitcher.
NOTE:
Do not overfill! To avoid spilling, do not add
ingredients past the “Max” fill line.
IMPORTANT: Never add ingredients into the
Blender Pitcher before placing the blades in first.
4
Place the Geared Lid onto the top of the Blender
Pitcher.
(Fig. 18)
Fig. 18
WARNING: Never leave the appliance unattended while in use.
CAUTION: Use caution when handling the blade assembly as the blades are very sharp.
IMPORTANT: Make sure that the Power Pod is plugged in for use.
WARNING: DO NOT try to assemble or operate the Power Pod, Geared Lid and blades together
outside of the containers.
CAUTION: If using the pour spout, make sure your thumb is firmly pressed down on the thumb
tab of the lid to secure the lid.
CAUTION: If pouring with the lid removed, ALWAYS remove the blade assembly first.