GET TO KNOW THE ATTACHMENTS
ADJUSTABLE SLICING:
The adjustable slicing disc
allows you to customize the slice
thickness (0.3–8mm). Great for
mushrooms, zucchini, cucumbers,
and potatoes. The disc has
8 main settings with
1
/
3
–mm
micro settings between each
(for a total of 24 individual settings)
ranging from 0.3mm–8mm.
BLADE ASSEMBLIES
3-PART FOOD PUSHER
DISC ASSEMBLIES
4.5 CUP NESTING WORKBOWL
(not included with all models, available for purchase on ninjaaccessories.com)
REVERSIBLE SHREDDING:
The reversible shredding
disc is ideal for different
thicknesses of shredding.
Place the FINE side up for
outputs such as shredded
carrots, or place the
COARSE side up for outputs
such as shredded cabbage.
DISC SPINDLE:
Install disc spindle onto the gear
shaft of the Precision Processor®
Bowl to use the disc assemblies
or 4.5 Cup Nesting Workbowl.
STORAGE BOX:
(not included with all models)
Easily and safely store the
disc assemblies, disc spindle,
and dough blade assembly in
the storage box.
3-PART FOOD PUSHER:
The 3-part food pusher separates into small, medium, and large food pushers
to guide ingredients through the different-sized feed chute openings. Use
the small feed chute opening (which also doubles as a measuring cup) for
ingredients like carrots, the medium feed chute for ingredients like cucumbers
and zucchini, and the large feed chute for ingredients like potatoes.
4.5-CUP NESTING WORKBOWL
The 4.5-Cup Nesting Workbowl
is perfect for smaller quantities of
output. Place inside the Precision
Processor Bowl and you will be
ready to make all the delicious
recipes in smaller quantities.
DOUGH BLADE
ASSEMBLY
CHOPPING BLADE
ASSEMBLY
SMALL CHOPPING
BLADE ASSEMBLY
IMPORTANT:
Ensure disc is
NOT
on the
S
(storage)
setting before installing it. Return disc
to
S
position after use.
NOTE:
As a safety feature, the large food pusher must be inserted in the feed chute for
the unit to run.
DO NOT
exceed the
CHUTE MAX FILL
line on the large feed
chute. Unit will not run if ingredients exceed this line.
Intelligent preset programs combine unique blending and pausing patterns that do the work for you.
Once an Auto-iQ program is selected, it will start immediately and automatically stop when processing
is complete. To stop processing before the end of a program, press the currently active button again.
NOTE:
Program run times vary from a few seconds to just over a minute.
AUTO-IQ® PROGRAMS
IMPORTANT: DO NOT
run the unit on HIGH if using the dough blade or disc assemblies.
The unit is
NOT
intended to crush ice. Refer to the warnings in the Safety Instructions.
MANUAL PROGRAMS
LOW and HIGH:
When selected, each
of these speeds runs continuously
for 60 seconds. They do not work in
conjunction with any Auto-iQ programs.
PULSE:
Offers greater control of pulsing and
processing. Operates only when PULSE is
pressed. Use short presses for short pulses
and long presses for long pulses.
CHOP
Timed pulses and pauses give you consistent chopping results. Run
program once for a large chop, twice for a small chop, and three times
for a mince. Use with chopping blade assembly.
DOUGH
Ideal for creating delicious dough, from pie to pizza to cookie doughs.
Use with dough blade assembly.
NOTE:
Use PULSE to add mix-ins, such as chocolate chips or raisins,
after dough program has completed.
PUREE
Create anything from silky-smooth sauces to the perfect hummus.
Use with chopping blade assembly or nesting workbowl with small
chopping blade assembly.
DISC
Slice and shred a variety of ingredients, such as vegetables, cheese, and
potatoes. Use with adjustable slicing or reversible shredding disc.
