9
10
0800 51 41 31
Assembling the Nutri Ninja
™
2-in-1 Food Processor Bowl
USING THE 4 BLADE
CAUTION:
Blades are sharp! Use extreme caution when
handling the blades. Always hold them by the shaft.
IMPORTANT:
Never run the appliance empty.
CAUTION:
Blades are removable. If pouring with the
lid removed, always remove the blade assembly first.
If using pour spout, make sure the lid is secure on the
pitcher/blender by firmly pressing on the thumb tab.
1
Place the Nutri Ninja
™
2-in-1 Food Processor Bowl on a
clean, dry, level surface.
2
Place the 4 Blade over the spindle pin inside the Food
Processor Bowl.
(Fig. 5)
3
Place ingredients in the Food Processor Bowl.
USING THE SINGLE AND DOUBLE DOUGH BLADES
IMPORTANT:
When making any type of dough,
DO
NOT
run the Power Pod continuously for more than 30
seconds. Do not add more than 275 g of flour maximum
when making dough. It is recommended to pulse until
the ingredients are mixed unless recipe instructions
state otherwise. If the unit is run continuously for more
than 30 seconds, let the Power Pod rest for 1 minute
before using again.
IMPORTANT:
Never run the appliance empty.
1
Place the Nutri Ninja
™
2-in-1 Food Processor Bowl on a
clean, dry, level surface.
2
Place the Dough Blade over the spindle pin inside the
Food Processor Bowl.
(Fig. 9)
Fig. 5
Fig. 9
Fig. 6
Fig. 7
WARNING: DO NOT
try to assemble or operate the Power Pod,
Geared Lid and blades together outside of the containers.
For best results, use short “
PULSES
” by pushing and releasing
the Power Pod button in short bursts... Practice makes perfect!!
Use the single dough blade for making pizza dough and other yeast
doughs. Use the double dough blade for making cookie dough.
NOTE:
Do not overfill! To avoid spilling, do not add
ingredients past the “Max” fill line.
NOTE:
For best results add wet ingredients first and
then add the dry ingredients.
4
Place the Geared Lid onto the top of the Food Processor
Bowl making sure the lid is securely in place.
(Fig. 6)
5
Plug the power cord into an electrical outlet and place the
Nutri Ninja
™
2-in-1 Power Pod on top of the Geared Lid.
Pulse until all ingredients are well mixed.
(Fig. 7, Fig. 8)
6
Once processing is completed and the blades have
stopped spinning, remove the Nutri Ninja
™
2-in-1 Power
Pod and the Geared Lid. Remove the 4 Blade.
3
Place ingredients in the Food Processor Bowl.
NOTE:
Do not overfill! To avoid spilling, do not add
ingredients past the “Max” fill line.
NOTE:
For best results add wet ingredients first and
then add the dry ingredients.
4
Place the Geared Lid onto the top of the Food Processor
Bowl making sure the lid is securely in place.
(Fig. 10)
5
Plug the power cord into an electrical outlet and place the
Nutri Ninja
™
2-in-1 Power Pod on top of the Geared Lid.
Pulse until all ingredients are well mixed.
(Fig. 11, Fig. 12)
6
Once processing is completed and the blades have
stopped spinning, remove the Nutri Ninja
™
2-in-1 Power
Pod and the Geared Lid. Remove the Dough Blade and
the dough.
Fig. 8
CAUTION: If using the pour spout, make sure your thumb is
firmly pressed down on the thumb tab of the lid to secure
the lid.
CAUTION: If pouring with the lid removed, ALWAYS remove
the blade assembly first.
Fig. 10
Fig. 11
Fig. 12
For best results, use short “
PULSES
” by pushing and releasing
the Power Pod button in short bursts... Practice makes perfect!!
or
