87
86
Configuring settings manually
Internet
Configure your access point’s settings manually.
Touch an open connection, indicated by
NONE.
2
Touch MANUAL SETUP.
3
Set each field and touch SAVE when finished.
When setting the IP address manually, be sure to also set the DNS.
Proxy settings can only be configured when configuring Advanced Setup.
4
Touch OK to perform a connection test.
5
Broadband
Internet Line
DSL Modem, etc.
Nintendo DSi
System
Access Point with
Router Functionality
How to Connect
Touch CONNECTION SETTINGS.
1
If the connection test is successful, setup is complete
Note:
If connection fails, refer to the list of error codes in the Support and Troubleshooting
section .
Page 108
➜
TWL_MAN_AUS_AppsSection.qxp 09.1.8 6:06 PM Page 86