Note: Check to be sure the “Wall mounting resin plate” is firmly attached to the device.
2. Attach the DC Plug lock to the device in the proper direction. (See Image 2.)
3. Secure the “Wall mounting bracket” to the wall using the screws. Use the three included Wall
mounting screws to attach the bracket firmly to the wall so that it will not come loose. (See
Image 3.)
Note: Check to be sure the “Wall mounting bracket” is firmly attached to the wall.
4. Insert the “Wall mounting resin plate” attached to the device into the “Wall mounting bracket”
tabs and then slide the device down so that it is firmly seated. (See Image 4.)
Note: Check to be sure the “Wall mounting resin plate” is firmly attached to the “Wall mounting
bracket.”
Image 1.
Image 2
