PERFORMING A SEAL CHECK:
It is necessary to perform a seal check on the respirator every
time you wear it.
Cup both hands around the
respirator
and inhale and exhale
forcefully several times. If you notice any air leakage, adjust the
nosepiece and headbands until the leakage is corrected. Once
corrected, repeat the seal check again.
WARNING
The
respirator
should not be used without a proper
fit. This
respirator
helps protect against certain contaminants. It may
not eliminate the risk of contracting disease or infection. Misuse may
result in sickness or death.
Materials which may come into contact with the wearer’s skin could
cause allergic reactions to susceptible individuals.
Learn more at
BNX.com
Manufactured by
BNX Converting, LLC.
16727 Park Row Houston, TX 77084 USA
FITTING INSTRUCTIONS:
Hold the respirator in your hands with your
fingertips on the nosepiece.
Position the respirator on your face with the
adjustable metal nosepiece facing up.
Test the seal by cupping both hands over the
respirator. Then, begin to inhale and exhale
sharply. If air leaks around the respirator’s
edges, adjust the straps and reposition the
nose piece until a proper seal is formed.
Using both hands, press down on the metal
nosepiece to form a tight-fitting seal around
your nose.
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
Pull the headbands over your head. Place
the bottom band below the ears and the top
band on the crown of your head.
