NIP
Pollux GigE Series – 01M / 05M Camera
Page
26
of
56 Manual 1.0
■
Hardware external trigger mode
Select Trigger Source and Choose Hardware to switch to the hardware external
trigger status.
Available parameter setting of input signal from hardware external trigger:
(1) Trigger edge selection
Selecting Rising Edge/Falling Edge under the external signal is available.
(2) Trigger delay
As shown in Figure 3-16, in order to integrate later, the camera can set delay time
when receiving the trigger signal. As shown in Figure 22, the delay time can be set
through Trigger Delay. The range is from 0 to 32000000 and the unit is μs
Figure 22.
Signal Delay Principle
Figure 23.
Delay Time Setting
